Izinto eziphambili ezisetyenziselwa ukwenza esi sixhobo sokugaya i-carbide eqinile.
Izinto eziqinileyo ze-carbide zibonelela ngokusebenza okungafaniyo kokusika, ubomi besixhobo obude kunye nokhuseleko lwenkqubo ephezulu.
Ikwaqinisekisa umgangatho okhethekileyo, ukuxhathisa, ubulukhuni kunye nobungqongqo, ezibaluleke kakhulu ekwenzeni izixhobo zokugaya.
Enye into esetyenziselwa ukwenza le mill yokuphela yaziwa ngokuba yitungsten carbide.
Ngokuqhelekileyo, le nto iqulethwe ngamacandelo alinganayo e-tungsten kunye ne-athomu ye-carbon, eyenza enye yeendlela ezifanelekileyo zokuphela kwe-carbide.
Yenza izixhobo zokugqibela, eziqinileyo, ezikwaziyo ukunxiba kwaye zivumela ukwenziwa komatshini kunye neempawu zokutshiphuza.
Ngaphaya koko, ii-mill end ezenziwe ngalo mathiriyeli zizisa ukusebenza okuzinzile ekusikeni okunzima, ngaloo ndlela zilungele ukugqiba kwangaphambili kwe-grooving kunye ne-side-milling operations.
| IBanga | Indawo yeSicelo se-ISO | Ubungakanani bozinkozo (μ m) | Umxholo weCobalt (%) | Ukuqina (HRA) | Ubuninzi (g/cm³) | T.R.S (N/mm³) | Kucetyiswa ukuba kwenziwe izicelo zamaBakala |
|---|---|---|---|---|---|---|---|
| HY06A | K05-K10 | 0.4 | 6.0 | 94.0 | 14.80 | 3800 | Ubungakanani obuziinkozo be-Ultrafine, kunye nokumelana okumangalisayo kokunxiba.I-endmill yokumelana okuphezulu kunye nezixhobo zokukrola ziyacetyiswa.Ifanelekile ukusika i-PCB kunye nezinto ezihlanganisiweyo. |
| HY08A | K10-K20 | 0.4 | 8.5 | 93.5 | 14.52 | 3800 | Ubungakanani bengqolowa obucokisekileyo, obunokumelana nokunxiba kakuhle.I-endmill yokuchasa ephezulu kunye nezixhobo zokukrola ziyacetyiswa.Ifanelekile ukusika iPCB kunye neplastiki. |
| HY12A | K20-K40 | 0.4 | 12.0 | 92.5 | 14.10 | 4200 | Ubungakanani bengqolowa obucokisekileyo, umxholo ophezulu we-Co; ngobulukhuni obugqwesileyo kunye nokuqina.I-Endmill kunye ne-reamer iyacetyiswa.Ukusebenza okugqwesileyo ukugqiba.Ingakumbi ilungele intsimbi yokusika (HRC:45-55), iAl alloy kunye ne-Ti alloy. |
| HY10 | K20-K40 | 0.6 | 10.0 | 91.7 | 14.40 | 4000 | I-Drill kunye ne-endmill iyanconywa.Ifanelekile ukusika i-generalsteel (HRC |
| HY10A | K20-K40 | 0.5 | 10.3 | 92.3 | 14.30 | 4200 | I-drill kunye ne-endmill ziyacetyiswa. Ngokukodwa kufanelekile ukugawula intsimbi engatyiwayo, i-alloy ekwazi ukumelana nobushushu, intsimbi yokuphosa. |
| HY12 | K20-K40 | 0.5 | 12.0 | 92.0 | 14.10 | 4200 | I-Endmill kunye ne-reaming yezinto ezinobunzima obuphezulu ziyacetyiswa.Ifanelekile kwintsimbi etyhidiweyo, intsimbi engenasici |
| HY06 | K10 | 0.6 | 6.0 | 93.3 | 14.90 | 3800 | I-Endmill kunye ne-reaming yezinto ezinobunzima obuphezulu ziyacetyiswa.Ifanelekile kwintsimbi etyhidiweyo, intsimbi engenasici |
| HY15 | K30-K40 | 1.5 | 15.0 | 87.6 | 14.0 | 4000 | Ilungele ukwenza i-punching yokubumba, izixhobo kunye ne-anti-vibration boring bar njl. |
IXESHA LOKUTHUMELA: 2023-04-23
