Tungsten carbide rotary burrs atawa filemangrupakeun produk metalurgi bubuk dijieunna tina bubuk micron-ukuran tina karbida logam refractory-karasa luhur (WC, TiC) salaku komponén utama, kobalt (Co) atawa nikel (Ni), molybdenum (Mo) salaku binders, sarta sintered dina tungku vakum. atawa tungku réduksi hidrogén.
Aplikasi:
Burrs Rotary Carbide seueur dianggo dina séktor industri sapertos mesin, mobil, kapal, bahan kimia, sareng ukiran karajinan. Kagunaan utama nyaéta:
(1) Finishing rupa-rupa rongga kapang logam.
(2) Karajinan ukiran tina rupa-rupa logam (beusi tuang, baja tuang, baja karbon, baja alloy, stainless steel, tambaga, aluminium, jsb) jeung non-logam (jade, marmer, tulang, jsb).
(3) Ngabersihkeun lampu kilat, burr, sareng las tuang, tempaan, sareng las, sapertos pabrik, galangan kapal, sareng pabrik mobil.
(4) Chamfering jeung ngolah alur rupa-rupa bagian mékanis, beberesih tina pipa, jeung pagawean tina beungeut liang jero bagian mékanis, kayaning pabrik mesin jeung pabrik perbaikan.
(5) Polishing tina passages aliran impeller, kayaning pabrik mesin mobil.
Spésifikasi sareng modél:
| Jinis sareng ukuran Rotary Burr | ||||||
| Wangun & Tipe | Urutan No. | Ukuran | ||||
| Potong Dia | Potong Panjang | Shank Dia | Gemblengna Panjang | Sudut Taper | ||
| A | A0616M06 | 6 | 16 | 6 | 61 | |
| A0820M06 | 8 | 20 | 6 | 65 | ||
| A1020M06 | 10 | 20 | 6 | 65 | ||
| A1225M06 | 12 | 25 | 6 | 70 | ||
| A1425M06 | 14 | 25 | 6 | 70 | ||
| A1625M06 | 16 | 25 | 6 | 70 | ||
| B | B0616M06 | 6 | 16 | 6 | 61 | |
| B0820M06 | 8 | 20 | 6 | 65 | ||
| B1020M06 | 10 | 20 | 6 | 65 | ||
| B1225M06 | 12 | 25 | 6 | 70 | ||
| B1425M06 | 14 | 25 | 6 | 70 | ||
| B1625M06 | 16 | 25 | 6 | 70 | ||
| C | C0616M06 | 6 | 16 | 6 | 61 | |
| C0820M06 | 8 | 20 | 6 | 65 | ||
| C1020M06 | 10 | 20 | 6 | 65 | ||
| C1225M06 | 12 | 25 | 6 | 70 | ||
| C1425M06 | 14 | 25 | 6 | 70 | ||
| C1625M06 | 16 | 25 | 6 | 70 | ||
| D | D0605M06 | 6 | 5.4 | 6 | 50 | |
| D0807M06 | 8 | 7.5 | 6 | 52 | ||
| D1009M06 | 10 | 9 | 6 | 54 | ||
| D1210M06 | 12 | 10 | 6 | 55 | ||
| D1412M06 | 14 | 12 | 6 | 57 | ||
| D1614M06 | 16 | 14 | 6 | 59 | ||
| E | E0610M06 | 6 | 10 | 6 | 55 | |
| E0813M06 | 8 | 13 | 6 | 58 | ||
| E1016M06 | 10 | 16 | 6 | 61 | ||
| E1220M06 | 12 | 20 | 6 | 65 | ||
| E1422M06 | 14 | 22 | 6 | 67 | ||
| E1625M06 | 16 | 25 | 6 | 70 | ||
| F | F0618M06 | 6 | 18 | 6 | 63 | |
| F0820M06 | 8 | 20 | 6 | 65 | ||
| F1020M06 | 10 | 20 | 6 | 65 | ||
| F1225M06 | 12 | 25 | 6 | 70 | ||
| F1425M06 | 14 | 25 | 6 | 70 | ||
| F1625M06 | 16 | 25 | 6 | 70 | ||
| G | G0618M06 | 6 | 18 | 6 | 63 | |
| G0820M06 | 8 | 20 | 6 | 65 | ||
| G1020M06 | 10 | 20 | 6 | 65 | ||
| G1225M06 | 12 | 25 | 6 | 70 | ||
| G1425M06 | 14 | 25 | 6 | 70 | ||
| G1625M06 | 16 | 25 | 6 | 70 | ||
| H | H0618M06 | 6 | 18 | 6 | 63 | |
| H0820M06 | 8 | 20 | 6 | 65 | ||
| H1025M06 | 10 | 25 | 6 | 70 | ||
| H1232M06 | 12 | 32 | 6 | 77 | ||
| H1636M06 | 16 | 36 | 6 | 81 | ||
| J | J0605M06 | 6 | 5.2 | 6 | 50 | 60° |
| J0807M06 | 8 | 7 | 6 | 52 | 60° | |
| J1008M06 | 10 | 8.7 | 6 | 53 | 60° | |
| J1210M06 | 12 | 10.4 | 6 | 55 | 60° | |
| J1613M06 | 16 | 13.8 | 6 | 58 | 60° | |
| K | K0603M06 | 6 | 3 | 6 | 48 | 90° |
| K0804M06 | 8 | 4 | 6 | 49 | 90° | |
| K1005M06 | 10 | 5 | 6 | 50 | 90° | |
| K1206M06 | 12 | 6 | 6 | 51 | 90° | |
| K1608M06 | 16 | 8 | 6 | 53 | 90° | |
| L | L0616M06 | 6 | 16 | 6 | 61 | 14° |
| L0822M06 | 8 | 22 | 6 | 67 | 14° | |
| L1025M06 | 10 | 25 | 6 | 70 | 14° | |
| L1228M06 | 12 | 28 | 6 | 73 | 14° | |
| L1428M06 | 14 | 28 | 6 | 73 | 14° | |
| L1633M06 | 16 | 33 | 6 | 78 | 14° | |
| M | M0618M06 | 6 | 18 | 6 | 63 | 14° |
| M0820M06 | 8 | 20 | 6 | 65 | 25° | |
| M1020M06 | 10 | 20 | 6 | 65 | 25° | |
| M1225M06 | 12 | 25 | 6 | 70 | 25° | |
| M1425M06 | 14 | 25 | 6 | 70 | 30° | |
| M1625M06 | 16 | 25 | 6 | 70 | 32° | |
| N | N0607M06 | 6 | 7 | 6 | 52 | 20° |
| N0809M06 | 8 | 9 | 6 | 54 | 20° | |
| N1011M06 | 10 | 11 | 6 | 56 | 20° | |
| N1213M06 | 12 | 13 | 6 | 58 | 20° | |
| N1616M06 | 16 | 16 | 6 | 61 | 20° | |
Kumaha carana milih Carbide rotary burr / file
1. Pamilihan bentuk cross-sectional tinacarbide rotary burr
Bentuk cross-sectional alat carbide Rotary Burr kudu dipilih dumasar kana bentuk bagian keur Filed, ku kituna wangun dua diadaptasi pikeun tiap lianna. Nalika ngeusian permukaan busur jero, pilih file semicircular atanapi file buleud (pikeun workpieces diaméterna leutik); lamun filing beungeut sudut jero, milih file triangular; lamun filing beungeut sudut katuhu jero, Anjeun bisa milih hiji file datar atawa file kuadrat, jsb Lamun maké file datar ka file beungeut sudut katuhu jero, nengetan nyieun sisi sempit (ujung lampu) tina file tanpa huntu. deukeut ka salah sahiji surfaces sudut katuhu jero pikeun nyegah ngaruksak beungeut sudut katuhu.
2. Pamilihan ketebalan huntu file
The ketebalan tina huntu file kudu dipilih nurutkeun ukuran sangu, akurasi processing, sarta sipat bahan tina workpiece nu bakal diolah. file kasar-huntu anu cocog pikeun ngolah workpieces kalawan tunjangan badag, akurasi diménsi low, formulir badag tur tolerances posisi, nilai roughness permukaan badag, sarta bahan lemes; Upami teu kitu, file rupa-huntu kudu dipilih. Lamun maké, milih nurutkeun sangu processing, akurasi dimensi, sarta roughness permukaan diperlukeun ku workpiece nu.
3. Pamilihan spésifikasi ukuran file carbide
Spésifikasi ukuran carbide Rotary Burr kudu dipilih nurutkeun ukuran workpiece keur diolah jeung sangu processing. Nalika ukuran pangolahan sareng sangu ageung, file ukuran ageung kedah dipilih, upami henteu kedah dipilih file anu ukuranana leutik.
4. Pamilihan pola huntu file
Pola huntu tungsten steel grinding file sirah kudu dipilih nurutkeun sipat workpiece keur Filed. Nalika filing workpieces bahan lemes kayaning aluminium, tambaga, jeung baja lemes, éta pangalusna ngagunakeun single-huntu (giling huntu) file. File single-huntu ngabogaan sudut hareup badag, sudut ngaganjel leutik, alur chip badag, sarta teu gampang bakiak jeung chip. Ujung motongna seukeut.
WAKTU POST: 2024-07-25
