Odhaah suugaaneed:
Qalabku wuxuu inta badan ku habboon yahay mishiinnada wax-shiidka ee jiifka ah ee farsamaynta wax-shiidid fidsan, wax-shiidid dhinac-mareen ah, meel-marineed. Alaabtu waxay isticmaashaa AlTiN Balzers daahan, oo leh waxqabad heersare ah.
 
Astaamaha:

• Ku habboon farsamaynta tayada sare leh ee birta iyo birta (≤ 60HRC).

• xagal helix-gaaban oo isbedbedelaya iyo garoonka biibiile kala duwan, waxay yaraynaysaa gariirka.

• Codsiga makiinada hufnaanta sare ee qoto dheer goynta weyn (ap), ballac goynta weyn (ae).

• 
  

Cabbirka caadiga ah:

11 . Micro Grain Carbide 4 Flute End mills

2. Micro Grain Solid Carbide Long Flute4 Square End Mills

3.Micro Grain Carbide 2Flute End Mills

4. Micro Grain Adag Carbide Long Flute2 Square End Mills

5.Micro Grain Carbide  2

6. Micro Grain Kaarbide  4 Flute Corner Radius End Mills

7.Micro Grain Carbide 2 Flute Ball Sanka Dhammaadka Mills

8.Micro Grain Kaarbide dheer Shank  2 Flute Ball Sanka  Dhamaadka Mills

Qalab ka kooban:
1. Qalabka Jirka:
a. Adag ka weyn ama la mid ah 92.8 HRA;
b. Cufnaanta ka weyn ama la mid ah 14.2g/cm³;
c. TRS ka weyn ama la mid ah 4200 N/mm²;
d. Lacag la'aan ah xaaladda marxaladda ETA;
e. Wax wasakh ah ma leh alaabta kale;
f. Porosity = A00/ B00 / C00 ;
g. Cabbirka badarka lebbiska ah oo joogto ah. Ma jiro cabbir hadhuudh ah oo ka weyn kara inta la cayimay.
h. Chromium carbide inhibitor koritaanka hadhuudhka oo kaliya.
2. Dhammaan agabka wax soo saarka, dahaarka waxaa lagu isticmaalaa Jarmalka, Switzerland, qalabka wax lagu sameeyo;
3. It's proposed cutting less than 60HRC;

Dahaarka:
Nano Coating AlTiN:
Tilmaamaha iyo Shaqada
1, content aluminium High waxay bixisaa engegnaanta kulul aad u fiican iyo iska caabin oksaydhka.
2. Habka gaarka ah wuxuu hagaajiyaa qaab-dhismeedka daahan, xasilloonida si weyn loo hagaajiyay, iyadoo la yareynayo tirada dhibcaha dusha sare.

Qiyaasta hawlgalka:

Fiiro gaar ah:

1. Hubi in qaybta shaqadu iyo mishiinkuba ay deggan yihiin isticmaalna haye sax ah.

2. Fadlan isku hagaaji xawaaraha, quudinta iyo qoto dheeraanta goynta iyadoo loo eegayo xaaladaha goynta dhabta ah.

3. Shuruudaha wax lagu shubo waxaa loogu talagalay mishiinka dhammaadka ah halkaasoo dhererka qalabku uu ka yar yahay 4*D (dhexroor-shiid kiimikaad). Marka qalabku dhererkiisu dheer yahay, fadlan hagaaji xawaaraha, quudinta iyo goynta qoto dheer.

Shirkaddu waxay leedahay line-soo-saarka habka wax soo saarka daab dhamaystiran oo ka soo diyaarinta alaabta ceeriin budada, samaynta caaryada, riixaya, sintering cadaadis, shiidi, daahan iyo daahan daahan ka dib daaweynta. Waxay diiradda saaraysaa cilmi-baarista iyo hal-abuurka ee alaabta saldhigga ah, qaab-dhismeedka jeexdin, samaynta saxda ah iyo daahan dusha sare ee gelinta carbide NC, waxayna si joogto ah u wanaajisaa hufnaanta mashiinnada, nolosha adeegga iyo guryaha kale ee goynta carbide NC. Ka dib in ka badan toban sano oo cilmi-baaris cilmiyeed iyo hal-abuurnimo, shirkaddu waxay kasbatay tiro tignoolajiyada aasaasiga ah ee madax-bannaan, waxay leedahay R&D madax-bannaan iyo awoodaha naqshadeynta, waxayna siin kartaa wax-soo-saar gaar ah macmiil kasta.