Zita rechigadzirwa: SNMG Insets
Series: SNMG
Chip-Breakers: AM/AR/BF/BM/BR/CM/DM
Product Information:
Turing isa SNMG. Kaviri-Side 90 ° mativi ekuisa. 0 degree reyamuro angle. Solid carbide zvishandiso zvinopa hupenyu hurefu hwematurusi uye nekukurumidza kucheka kumhanya kupfuura mamwe ma substrates, asi ane brittle uye anofanirwa kushandiswa ane rigid tool hold systems.Inopa hupenyu hurefu hwematurusi kupfuura magiredhi asina kuvharwa. Inoshandiswa pane zvakasiyana-siyana zvezvinhu uye kushandiswa.
Zvinodiwa:
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi Finishing | SNMG120404-AM | 1.00-5.00 | 0.12-0.40 | • | O | • | O | O | |||||||
SNMG120408-AM | 1.20-5.00 | 0.15-0.55 | • | O | • | O | O | ||||||||
SNMG120412-AM | 1.50-5.00 | 0.20-0.55 | • | O | • | O | O | ||||||||
SNMG150612-AM | 2.00-7.00 | 0.30-0.65 | • | O | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Rough Machining | SNMG120408-AR | 2.50-6.00 | 0.25-0.70 | • | O | ||||||||||
SNMG120412-AR | 2.50-6.00 | 0.30-0.70 | • | O | |||||||||||
SNMG120416-AR | 2.50-6.00 | 0.40-0.70 | • | O | |||||||||||
SNMG150612-AR | 2.15-6.40 | 0.25-0.50 | • | O | |||||||||||
SNMG190612-AR | 2.15-6.40 | 0.25-0.50 | • | O | |||||||||||
SNMG190616-AR | 2.85-7.60 | 0.30-0.65 | • | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Kupedza | SNMG120404-BF | 0.25-3.20 | 0.05-0.15 | • | • | O | O | ||||||||
SNMG120408-BF | 0.50-3.20 | 0.10-0.30 | • | • | O | O | |||||||||
SNMG120412-BF | 0.75-3.20 | 0.15-0.45 | • | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi Finishing | SNMG120404-BM | 0.30-4.20 | 0.08-0.25 | O | O | • | O | O | |||||||
SNMG120408-BM | 0.65-4.20 | 0.15-0.45 | O | O | • | O | O | ||||||||
SNMG120412-BM | 0.95-4.20 | 0.25-0.65 | O | O | • | O | O | ||||||||
SNMG150608-BM | 0.65-5.20 | 0.15-0.45 | O | O | • | O | O | ||||||||
SNMG150612-BM | 0.95-5.20 | 0.25-0.65 | O | O | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Rough Machining | SNMG120404-BR | 0.30-4.20 | 0.08-0.25 | O | O | O | • | • | O | ||||||
SNMG120408-BR | 0.65-4.20 | 0.15-0.45 | O | O | O | • | • | O | |||||||
SNMG120412-BR | 0.95-4.20 | 0.23-0.66 | O | O | O | • | • | O | |||||||
SNMG150608-BR | 0.65-5.20 | 0.15-0.44 | O | O | O | • | • | O | |||||||
SNMG150612-BR | 0.95-5.20 | 0.23-0.66 0.23-0.66 | O | O | O | • | • | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||
CVD | |||||||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi Finishing | SNMG120404-CM | 0.40-4.20 | 0.08-0.25 | • | O | ||
SNMG120408-CM | 0.80-4.20 | 0.15-0.45 | • | O | |||
SNMG120412-CM | 1.20-4.20 | 0.25-0.65 | • | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | ||||||||||||
CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Semi Finishing | SNMG120404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | • | • | O | O | ||||||
SNMG120408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
SNMG120412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
SNMG120416-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | • | • | O | O | |||||||
SNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
SNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
SNMG150616-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | • | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application:
Chikumbiro chekushandura uye kugaya kabhoni uye alloy simbi, maturusi simbi nesimbi isina tsvina.
Iyo kambani ine yakazara blade yekugadzira michina yekugadzira michina mutsara kubva paupfu kugadzirwa kwezvinhu, kugadzira mold, kudzvanya, kudzvanya sinter, kugaya, kupeta uye kupeta mushure mekurapa. Inotarisa pakutsvagisa uye kuvandudzwa kwezvinhu zvepasi, groove chimiro, kunyatso kuumbwa uye kuvharika kwepamusoro kwecarbide NC inoisa, uye inogara ichivandudza machining kunyatsoita, hupenyu hwebasa uye zvimwe zvekucheka zvivakwa zvecarbide NC inoisa. Mushure memakore anopfuura gumi ekutsvagisa kwesainzi uye hunyanzvi, kambani yakabata akati wandei yakazvimirira tekinoroji, ine yakazvimiririra R&D uye dhizaini kugona, uye inogona kupa yakagadziridzwa kugadzirwa kune wega mutengi.