Zita rechigadzirwa: DNMG Insets
Nyaya: DNMG
Chip-breakers: AM/AR/AS/BF/BM/BR/CM/DM/SM/TM
Product Information:
Turing isa DNMG. Kaviri-Side 55° Rhombic Insets. Clearance angle 0°. Yakagadziridzwa substrate uye coating musanganiswa wekuita kwepamusoro. Geometry yekuisa yakagadziridzwa kuitira machining application. Giredhi uye geometry inopa kuvimbika kwemaitiro. Kuonekwa kwekupfeka kwakanakisa kunoita kuti mipendero yese ishandiswe.Nekusiyana kwehukuru hwakasiyana huripo, tinoita kuti zvive nyore kusarudza iyo yakakodzera yekuchinjisa yekuisa kune yako yakarongwa maapplication.
Zvinodiwa:
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi Finishing | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | • | O | • | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | • | O | • | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | • | O | • | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | • | O | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Rough Machining | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | • | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | • | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | • | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | • | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Kupedza | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | • | • | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | • | • | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | • | • | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | • | • | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | • | • | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | • | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi Finishing | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | • | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | • | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | • | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Rough Machining | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | • | • | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | • | • | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | • | • | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | • | • | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | CVD | |||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi Finishing | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | • | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | • | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | • | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | • | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | • | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | • | O |
• : Recommended Giredhi
O: Optional Giredhi
Application | Type | Ap (mm) | Fn (mm/rev) | Giredhi | ||||||||||||
CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Semi Finishing | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | • | • | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | • | • | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O |
• : Recommended Giredhi
O: Optional Giredhi
Application:
DNMG yekucheka chishandiso chinoshandiswa grooving, profiling, kupedzisa, uye mamwe machining application.
Sarudzo yekutanga yekutendeuka kwekunze kwe slim workpieces emhando dzese dzesimbi, yakakodzera kupedzisa kwepakati uye kupedzisa.
Iyo kambani ine yakazara blade yekugadzira michina yekugadzira michina mutsara kubva paupfu kugadzirwa kwezvinhu, kugadzira mold, kudzvanya, kudzvanya sinter, kugaya, kupeta uye kupeta mushure mekurapa. Inotarisa pakutsvagisa uye kuvandudzwa kwezvinhu zvepasi, groove chimiro, kunyatso kuumbwa uye kuvharika kwepamusoro kwecarbide NC inoisa, uye inogara ichivandudza machining kunyatsoita, hupenyu hwebasa uye zvimwe zvekucheka zvivakwa zvecarbide NC inoisa. Mushure memakore anopfuura gumi ekutsvagisa kwesainzi uye hunyanzvi, kambani yakabata akati wandei yakazvimirira tekinoroji, ine yakazvimiririra R&D uye dhizaini kugona, uye inogona kupa yakagadziridzwa kugadzirwa kune wega mutengi.