Jeneng produk: Sisipan SNMG
Seri: SNMG
Chip-Breakers: AM/AR/BF/BM/BR/CM/DM
Informasi produk:
Turing masang SNMG. sisipan kothak 90 ° pindho sisi. Sudut relief 0 derajat. Piranti karbida padhet nawakake umur alat sing dawa lan kecepatan pemotongan luwih cepet tinimbang substrat liyane, nanging luwih rapuh lan kudu digunakake kanthi sistem nyekel alat sing kaku. Nyedhiyakake umur alat sing luwih dawa tinimbang kelas sing ora dilapisi. Digunakake ing macem-macem bahan lan aplikasi.
Spesifikasi:
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi Finishing | SNMG120404-AM | 1.00-5.00 | 0.12-0.40 | • | O | • | O | O | |||||||
SNMG120408-AM | 1.20-5.00 | 0.15-0.55 | • | O | • | O | O | ||||||||
SNMG120412-AM | 1.50-5.00 | 0.20-0.55 | • | O | • | O | O | ||||||||
SNMG150612-AM | 2.00-7.00 | 0.30-0.65 | • | O | • | O | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Mesin Kasar | SNMG120408-AR | 2.50-6.00 | 0.25-0.70 | • | O | ||||||||||
SNMG120412-AR | 2.50-6.00 | 0.30-0.70 | • | O | |||||||||||
SNMG120416-AR | 2.50-6.00 | 0.40-0.70 | • | O | |||||||||||
SNMG150612-AR | 2.15-6.40 | 0.25-0.50 | • | O | |||||||||||
SNMG190612-AR | 2.15-6.40 | 0.25-0.50 | • | O | |||||||||||
SNMG190616-AR | 2.85-7.60 | 0.30-0.65 | • | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Rampung | SNMG120404-BF | 0.25-3.20 | 0.05-0.15 | • | • | O | O | ||||||||
SNMG120408-BF | 0.50-3.20 | 0.10-0.30 | • | • | O | O | |||||||||
SNMG120412-BF | 0.75-3.20 | 0.15-0.45 | • | • | O | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi Finishing | SNMG120404-BM | 0.30-4.20 | 0.08-0.25 | O | O | • | O | O | |||||||
SNMG120408-BM | 0.65-4.20 | 0.15-0.45 | O | O | • | O | O | ||||||||
SNMG120412-BM | 0.95-4.20 | 0.25-0.65 | O | O | • | O | O | ||||||||
SNMG150608-BM | 0.65-5.20 | 0.15-0.45 | O | O | • | O | O | ||||||||
SNMG150612-BM | 0.95-5.20 | 0.25-0.65 | O | O | • | O | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Mesin Kasar | SNMG120404-BR | 0.30-4.20 | 0.08-0.25 | O | O | O | • | • | O | ||||||
SNMG120408-BR | 0.65-4.20 | 0.15-0.45 | O | O | O | • | • | O | |||||||
SNMG120412-BR | 0.95-4.20 | 0.23-0.66 | O | O | O | • | • | O | |||||||
SNMG150608-BR | 0.65-5.20 | 0.15-0.44 | O | O | O | • | • | O | |||||||
SNMG150612-BR | 0.95-5.20 | 0.23-0.66 0.23-0.66 | O | O | O | • | • | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | |||
CVD | |||||||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi Finishing | SNMG120404-CM | 0.40-4.20 | 0.08-0.25 | • | O | ||
SNMG120408-CM | 0.80-4.20 | 0.15-0.45 | • | O | |||
SNMG120412-CM | 1.20-4.20 | 0.25-0.65 | • | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi | Jinis | Ap (mm) | Fn (mm / rev) | sasmita | ||||||||||||
CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Semi Finishing | SNMG120404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | • | • | O | O | ||||||
SNMG120408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
SNMG120412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
SNMG120416-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | • | • | O | O | |||||||
SNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
SNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
SNMG150616-DM | 1.80-3.90 | 0.30-0.90 | O | O | O | • | • | O | O |
• : Rekomendasi Grade
O: Kelas Pilihan
Aplikasi:
Aplikasi kanggo ngowahi lan panggilingan baja karbon lan paduan, baja alat lan baja tahan karat.
Perusahaan kasebut nduweni lini produksi peralatan proses manufaktur blade lengkap saka persiapan bahan baku bubuk, nggawe cetakan, pressing, sintering tekanan, grinding, lapisan lan lapisan sawise perawatan. Fokus ing riset lan inovasi saka materi dhasar, struktur alur, tliti mbentuk lan nutupi lumahing carbide NC sisipan, lan saya mbenakake efficiency mesin, urip layanan lan situs nglereni liyane carbide NC sisipan. Sawise luwih saka sepuluh taun riset ilmiah lan inovasi, perusahaan wis nguwasani sawetara teknologi inti sawijining, duwe R&D lan kemampuan desain sawijining, lan bisa nyedhiyani produksi selaras kanggo saben customer.