Okwu nkịtị:
The ngwá ọrụ bụ tumadi kwesịrị ekwesị maka kehoraizin-egwe ọka igwe nhazi nke flat-egwe ọka, akụkụ-egwe ọka, slotting. Ngwaahịa a na-eji mkpuchi AlTiN Balzers, nwere arụmọrụ dị elu.
 
Atụmatụ:

• Kwesịrị ekwesị maka ịrụ ọrụ dị elu nke ígwè & ígwè (≤ 60HRC).

• Akụkụ helix na-agbanwe agbanwe na ụda ọjà dị iche, na-ebelata ịma jijiji.

• Ngwa na-arụ ọrụ dị elu nke nnukwu ịkpụ omimi (ap), nnukwu obosara nke ịkpụ (ae).

• 
  

Nha oge niile:

1 . Micro Grain Carbide 4 Flute End mills

2. Micro ọka siri ike Carbide Long Flute4 Square Ọgwụgwụ Mills

3.Micro ọka Carbide 2Flute Ọgwụgwụ Mills

4. Micro ọka siri ike Carbide Long Flute2 Square Ọgwụgwụ Mills

5.Micro ọka Carbide  2 Flute Corner Radius End Mills

6. Micro ọka Carbide  4 Flute Corner Radius End Mills

7.Micro ọka Carbide 2 Flute Ball Imi  Ọgwụgwụ Mills

8.Micro ọka Carbide ogologo Shank 2 Flute Ball imi  Ọgwụgwụ Mills

Ngwa ihe mejupụtara:
1. Njirimara anụ ahụ:
a. Ike siri ike karịa ma ọ bụ hà nhata 92.8 HRA;
b. Njupụta karịrị ma ọ bụ hà nhata 14.2g/cm³;
c. TRS karịrị ma ọ bụ hà nhata 4200 N/mm²;
d. Enweghị ọnọdụ usoro ETA;
e. Enweghị mmetọ site na ihe ndị ọzọ;
f. Porosity = A00/B00 / C00;
g. Uwe ọka na-agbanwe agbanwe. Ọ nweghị nha ọka nwere ike ibu karịa akọwapụtara.
h. naanị ihe na-egbochi uto ọka chromium carbide.
2. A na-eji ngwá ọrụ niile na-emepụta ihe, mkpuchi mkpuchi na Germany, Switzerland, ngwá ọrụ nhazi;
3. It's proposed cutting less than 60HRC;

Mkpuchi:
Nano mkpuchi AlTiN:
Njirimara na Ọrụ
1, High aluminum ọdịnaya na-enye magburu onwe ọkụ ike na ọxịdashọn iguzogide.
2, Usoro pụrụ iche optimizes Ọdịdị nke mkpuchi, pụtara mma kwụsie ike, na-ebelata ọnụ ọgụgụ nke elu droplet.

Oke ọrụ:

Nlebara anya:

1. Gbaa mbọ hụ na mpempe ọrụ na igwe kwụsiri ike wee jiri njide ziri ezi.

2. Biko mezie ọsọ, nri na igbutu omimi dị ka ọnọdụ ịkpụ n'ezie.

3. Ọnọdụ igwe nri bụ maka igwe ihe igwe na-akwụsị ebe ngwaọrụ overhang ogologo na-erughị 4 * D (dayameta igwe nri). Mgbe ogologo overhang ngwá ọrụ dị ogologo, biko gbanwee ọsọ, nri na igbutu omimi.

The ụlọ ọrụ nwere zuru ezu agụba n'ichepụta usoro akụrụngwa mmepụta akara si ntụ ntụ akụrụngwa nkwadebe, ebu ime, ịpị, sintering nrụgide, egweri, mkpuchi na mkpuchi post-ọgwụgwọ. Ọ na-elekwasị anya na nyocha na ọhụrụ nke isi ihe, uzo Ọdịdị, nkenke akpụ na elu mkpuchi nke carbide NC inserts, na mgbe niile mma machining arụmọrụ, ọrụ ndụ na ndị ọzọ ọnwụ Njirimara nke carbide NC inserts. Mgbe ihe karịrị afọ iri nke nnyocha sayensị na ọhụrụ, ụlọ ọrụ amụtala ọnụ ọgụgụ nke onwe teknụzụ isi, nwere onwe R&D na imewe ike, na ike inye ahaziri mmepụta maka onye ọ bụla ahịa.