Aha ngwaahịa: SCMT Inserts
Usoro: SCMT
Ndị na-agbaji mgbawa: JW/MM
Ozi ngwaahịa:
SCMT 90° Square Shaped Indexable Inserts."S" ụdị ntinye na-enye ike ntinye udi, dị ukwuu maka ọkara ka roughing ngwa.Ngative inserts nwere ike inye ruo 8 ọnwụ onu.Available na multiple chipbreakers & grades. Ntinye dị mma na mgbawa mgbawa.
Ụdị: Square (S)
Akụkụ mkpochapụ: 7° (C)
Nkwenye: Klas M (M)
Ụdị: Otu akụkụ (T)
Chipbreaker: Ebumnuche izugbe
Nkọwapụta:
Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | ||||||||||
CVD | PVD | |||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1525 | JR1010 | ||||
Izugbe Mmecha ọkara | SCMT09T304-JW | 0.40-3.10 | 0.05-0.20 | • | O | • | O | O | • | O | O | |||
SCMT09T308-JW | 0.80-3.10 | 0.10-0.35 | • | O | • | O | O | • | O | O | ||||
SCMT120404-JW | 0.40-4.20 | 0.05-0.20 | • | O | • | O | O | • | O | O | ||||
SCMT120408-JW | 0.80-4.20 | 0.10-0.30 | • | O | • | O | O | • | O | O | ||||
SCMT120412-JW | 1.20-4.20 | 0.15-0.55 | • | O | • | O | O | • | O | O |
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1525 | JR1010 | ||||
M Emecha | SCMT09T304-MM | 0.30-2.40 | 0.05-0.15 | • | O | • | O | ||||||||
SCMT09T308-MM | 0.60-2.40 | 0.10-0.30 | • | O | • | O |
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
Ngwa:
Ngwa maka ígwè. Igwe anaghị agba nchara.
The ụlọ ọrụ nwere zuru ezu agụba n'ichepụta usoro akụrụngwa mmepụta akara si ntụ ntụ akụrụngwa nkwadebe, ebu ime, ịpị, sintering nrụgide, egweri, mkpuchi na mkpuchi post-ọgwụgwọ. Ọ na-elekwasị anya na nyocha na ọhụrụ nke isi ihe, uzo Ọdịdị, nkenke akpụ na elu mkpuchi nke carbide NC inserts, na mgbe niile mma machining arụmọrụ, ọrụ ndụ na ndị ọzọ ọnwụ Njirimara nke carbide NC inserts. Mgbe ihe karịrị afọ iri nke nnyocha sayensị na ọhụrụ, ụlọ ọrụ amụtala ọnụ ọgụgụ nke onwe teknụzụ isi, nwere onwe R&D na imewe ike, na ike inye ahaziri mmepụta maka onye ọ bụla ahịa.