- English
- Español
- Português
- Deutsch
- Français
- Italiano
- हिन्दी
- Русский
- 한국어
- 日本語
- العربية
- ภาษาไทย
- Türkçe
- Nederlands
- Tiếng Việt
- Bahasa Indonesia
- עברית
- Afrikaans
- አማርኛ
- Azerbaijani
- беларуская мова
- Български
- বাংলা
- bosanski jezik
- Català
- Binisaya
- Corsu
- Čeština
- Cymraeg
- Dansk
- Ελληνικά
- Esperanto
- Eesti Keel
- Euskara
- فارسی
- Suomi
- Frysk
- Gaeilge
- Gàidhlig
- Galego
- ગુજરાતી
- Harshen Hausa
- ʻŌlelo Hawaiʻi
- Hmoob
- Hrvatski
- Kreyòl Ayisyen
- Magyar
- Հայերեն
- Asụsụ Igbo
- Íslenska
- Basa Jawa
- ქართული
- Қазақ тілі
- ភាសាខ្មែរ
- ಕನ್ನಡ
- Kurdî
- кыргыз тили
- Lëtzebuergesch
- ພາສາລາວ
- Lietuvių
- Latviešu
- Malagasy fiteny
- Te Reo Māori
- македонски
- മലയാളം
- Монгол
- मराठी
- Bahasa Melayu
- Malti
- မြန်မာစာ
- नेपाली
- Norsk
- Chinyanja
- ଓଡ଼ିଆ oṛiā
- ਪੰਜਾਬੀ
- Polski
- پښتو
- Română
- Ikinyarwanda
- سنڌي
- සිංහල
- Slovenčina
- slovenščina
- Gagana Sāmoa
- ChiShona
- Af-Soomaali
- Shqip
- Српски
- Sesotho
- Basa Sunda
- Svenska
- Kiswahili
- தமிழ்
- తెలుగు
- Тоҷикӣ
- Türkmençe
- Filipino
- татарча
- ئۇيغۇر تىلى
- Українська
- اردو
- Oʻzbek tili
- isiXhosa
- ײִדיש
- èdè Yorùbá
- 中文(简体)
- 中文(漢字)
- isiZulu
Ntinye DNMG
Ntinye DNMG
Aha ngwaahịa: DNMG Inserts
Usoro: DNMG
Chip-Breakers: AM/AR/AS/BF/BM/BR/CM/DM/SM/TM
Ozi ngwaahịa:
Ntinye ntinye DNMG. Ihe ntinye Rhombic 55 nwere akụkụ abụọ. Akụkụ mkpochapụ 0°. Ngwakọta nke kachasị mma na mkpuchi mkpuchi maka ịrụ ọrụ kacha elu. Geometry nke ntinye ahaziri maka ngwa igwe. Ọkwa na geometry na-enye usoro ntụkwasị obi. Nchọpụta uwe mara mma na-eme ka a na-eji akụkụ niile eme ihe. Site n'ọtụtụ dị iche iche dị, anyị na-eme ka ọ dị mfe ịhọrọ ntinye ntụgharị dị mma maka ngwa gị zubere.
Nkọwapụta:
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Mmecha ọkara | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | • | O | • | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | • | O | • | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | • | O | • | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | • | O | • | O | O | ||||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Machining siri ike | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | • | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | • | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | • | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | • | O | |||||||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Emecha | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | • | • | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | • | • | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | • | • | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | • | • | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | • | • | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | • | • | O | O | |||||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Mmecha ọkara | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | • | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | • | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | • | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | • | O | O | ||||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Machining siri ike | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | • | • | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | • | • | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | • | • | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | • | • | O | |||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | CVD | |||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Mmecha ọkara | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | • | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | • | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | • | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | • | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | • | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | • | O | |||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
| Ngwa | Ụdị | Ap (mm) | Fn (mm/mkpu) | Ọkwa | ||||||||||||
| CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Mmecha ọkara | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | • | • | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | • | • | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
Ngwa:
Ihe eji egbutu DNMG eji eme ihe maka ịkwa akwa, ịkọwapụta, imecha na ngwa igwe ndị ọzọ.
Nhọrọ mbụ maka ntụgharị mpụta nke slim workpieces nke ụdị nchara niile, dabara maka ịmecha ọkara na imecha.
The ụlọ ọrụ nwere zuru ezu agụba n'ichepụta usoro akụrụngwa mmepụta akara si ntụ ntụ akụrụngwa nkwadebe, ebu ime, ịpị, sintering nrụgide, egweri, mkpuchi na mkpuchi post-ọgwụgwọ. Ọ na-elekwasị anya na nyocha na ọhụrụ nke isi ihe, uzo Ọdịdị, nkenke akpụ na elu mkpuchi nke carbide NC inserts, na mgbe niile mma machining arụmọrụ, ọrụ ndụ na ndị ọzọ ọnwụ Njirimara nke carbide NC inserts. Mgbe ihe karịrị afọ iri nke nnyocha sayensị na ọhụrụ, ụlọ ọrụ amụtala ọnụ ọgụgụ nke onwe teknụzụ isi, nwere onwe R&D na imewe ike, na ike inye ahaziri mmepụta maka onye ọ bụla ahịa.
