Non pwodwi: DNMG Insert
Seri: DNMG
Chip-breakers: AM/AR/AS/BF/BM/BR/CM/DM/SM/TM
Enfòmasyon sou pwodwi:
Turing mete DNMG. Double-sided 55 ° Rhombic Insert. Clearance ang 0°. Optimize substra ak konbinezon kouch pou pèfòmans siperyè. Jeyometri nan insert optimize pou aplikasyon D '. Klas ak jeyometri bay pwosesis fyab. Ekselan deteksyon mete asire tout kwen yo itilize.Ak yon seri de gwosè diferan ki disponib, nou fè li fasil yo chwazi insert nan vire ideyal pou aplikasyon ou te planifye.
Espesifikasyon:
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi fini | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | • | O | • | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | • | O | • | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | • | O | • | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | • | O | • | O | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Machin ki graj | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | • | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | • | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | • | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | • | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Fini | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | • | • | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | • | • | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | • | • | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | • | • | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | • | • | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | • | • | O | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi fini | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | • | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | • | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | • | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | • | O | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Machin ki graj | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | • | • | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | • | • | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | • | • | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | • | • | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | CVD | |||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi fini | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | • | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | • | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | • | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | • | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | • | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | • | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | ||||||||||||
CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Semi fini | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | • | • | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | • | • | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | • | • | O | O |
• : Klas Rekòmande
O: Klas si ou vle
Aplikasyon:
Zouti koupe DNMG yo itilize pou grooving, profilage, fini, ak lòt aplikasyon pou MACHINING.
Premye chwa pou vire ekstèn nan pyès mens nan tout kalite asye, apwopriye pou fini mwayen ak fini.
Konpayi an gen yon liy pwodiksyon ekipman pwosesis manifakti lam konplè soti nan preparasyon poud matyè premyè, fè mwazi, peze, presyon SINTERING, fanm k'ap pile, kouch ak kouch apre-tretman. Li konsantre sou rechèch la ak inovasyon nan materyèl la baz, estrikti Groove, fòme presizyon ak kouch sifas nan foure carbure NC, ak toujou ap amelyore efikasite nan machin, lavi sèvis ak lòt pwopriyete koupe nan foure carbure NC. Apre plis pase dis ane nan rechèch syantifik ak inovasyon, konpayi an te metrize yon kantite teknoloji debaz endepandan, gen endepandan R & D ak kapasite konsepsyon, epi li ka bay pwodiksyon Customized pou chak kliyan.