• banner01

ʻO nā lau ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide

ʻO nā lau ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide
  • ʻO nā lau ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide
  • ʻO nā lau ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide
  • ʻO nā lau ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide

Carbide ʻike maka ʻoki ʻoki

wehewehe:

No ka hoʻohana ʻana i nā ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide, nā ʻoki ʻoki carbideHoʻohana nui ʻia ʻo Tungsten carbide circular knife no ka ʻoki ʻana i ka pepa, kānana cigar, rubber, plastic, steel, soft metal, wood, MDF, etc.


Nui : 75*25.4*T1.0-72T

He kūpono no ka mīkini metala a me ka lāʻau

Paʻakiki: 92.6 HRA

Niho : 72T

NUI HUA

ʻO nā lau ʻoki ʻoki ʻoki ʻoki ʻo Tungsten carbide

ʻO ka hapa nui o nā ʻoki ʻoki i hana ʻia me ke ʻano like o ke kila kiʻekiʻe, carbide a me nā mea ʻē aʻe. Ke hoʻohālikelike ʻia me ke kila kiʻekiʻe, ʻoi aku ka paʻakikī o ka carbide, ʻoi aku ka ikaika o ka ʻoki ʻana, ka wikiwiki kiʻekiʻe a me ka nui o ka hānai, a ʻoi aku ka nui o ka huahana.

Hiʻona:

Hoʻohana nui ʻia i: nā aniani, nā wati, nā mīkini, nā uila, nā motika a me nā ʻoihana ʻē aʻe


ʻO nā mea maikaʻi o Tungsten carbide ʻoki ʻoki poepoe ʻili, nā ʻoki ʻoki carbide

1. Me ka submicron grain size ,Good aahu-kue, lōʻihi lawelawe ola.

2. Me ka mana hoʻomanawanui koʻikoʻi

3. E hauʻoli i ke kūpaʻa ʻaʻahu maikaʻi a me nā paʻakikī kiʻekiʻe

4. Hāʻawi kahi kaʻina hana Hot Isostatic Press (HIP) i ka hoʻomaikaʻi maikaʻi ʻana i nā huahana i hoʻopau ʻia e hōʻoia i ka hilinaʻi meterial

5. E koho pono mākou i ka papa i koi ʻia no ka hana ʻoki maikaʻi ma muli o nā makahiki o ka ʻike ma ke kula




undefined


undefined

Anawaena waho(D)Mānoanoa (H)Anawaena loko(d)Teet(T)
250.2--5.06   8  1010--58
300.2--5.06  8  1010--60
320.2--6.06  8  10 12.710--60
350.2--6.08  10  12.710--60
400.2--6.08  10  12.710--80
450.2--8.010  12.7  1610--80
500.2--8.010  12.7  1610--100
550.2--8.012.7  1624--120
600.2--8.012.7  13 1624--120
630.2--8.012.7 13 1624--120
700.3--8.016  22  25.428--120
750.5--8.016  22  25 430--120 
800.5--8.022  25.430--128
850.5--8.022  25.430--128
900.5--8.022  25.430--160 
1000.5--8.022  25.4  2730--160
1100.8--8.022  25.4  27  3230--180
1201.0--10.022  25.4  27  3230-240
1251.0--10.022  25.4  2730-240
1501.0--10.022  25.4  27  3240-240



Mea hana mea hana haku:

1. Nā Pono Kino:
A) ʻoi aku ka paʻakikī ma mua a i ʻole like me 92.6 HRA;
B) ʻoi aku ka nui ma mua a i ʻole like me 14.4g/cm³;

C) ʻoi aku ka nui o TRS ma mua a i ʻole like me 3800 N/mm²;


undefined


Nānā:
1、E hōʻoia i ka paʻa o ka ʻāpana hana a me ka mīkini a hoʻohana i kahi paʻa pololei.
2、E ʻoluʻolu e hoʻoponopono i ka wikiwiki, hānai a ʻokiʻoki i ka hohonu e like me nā kūlana ʻoki maoli.



undefined

Loaʻa i ka hui kahi laina hana hana ʻenehana piha mai ka pauka maka mea hoʻomākaukau, hana ʻia, kaomi ʻana, kaomi sintering, wili, ka uhi a me ka uhi ʻana ma hope o ka mālama ʻana. Hoʻopili ia i ka noiʻi a me ka hana hou o ka waihona kumu, ka hoʻolālā groove, ka hoʻokumu pololei ʻana a me ka uhi ʻana o ka carbide NC inserts, a hoʻomaikaʻi mau i ka hana machining, ke ola lawelawe a me nā waiwai ʻoki ʻē aʻe o ka carbide NC inserts. Ma hope o ʻumi mau makahiki o ka noiʻi ʻepekema a me ka hana hou, ua ʻike ka hui i nā ʻenehana kumu kūʻokoʻa, loaʻa iā R&D kūʻokoʻa a me nā mana hoʻolālā, a hiki ke hāʻawi i ka hana maʻamau no kēlā me kēia mea kūʻai.

  • MAMUA:Carbide ʻike maka ʻoki ʻoki
  • NEXT:Mea ʻoki pepa ʻāwili

    • ʻO kāu leka