Ainm toraidh: Cuir a-steach gearradh meatailt
Sreath: WNMG Turning Inserts
Luchd-brisidh chip: AM/AR/BF/BM/BR/CM/DM/
Fiosrachadh toraidh:
WNMG Turning Inserts 80 ° Cuir a-steach cuir a-steach dà thaobh le ceàrn faochaidh àicheil (0 °), a’ tabhann oir làidir airson tagraidhean coitcheann agus doimhneachd eadar-dhealaichte de ghearradh a rèir an seòrsa brisidh chip thairis air a ’mhòr-chuid de stuthan. Faodaidh WNMG Turning Inserts dèiligeadh ri ioma-obair le bhith a’ cothlamadh diofar luchd-brisidh chip agus grade.it an roghainn gu math eaconamach airson do chinneasachadh, leis gu bheil iad air an dèanamh gu co-chothromach, gus an urrainn dhaibh gluasad gu oir eile nuair a bhios an aon cheann air a chaitheamh.
Sònrachaidhean:
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi-chrìochnachadh | WNMG080404-AM | 0.60-4.30 | 0.10-0.30 | • | O | • | O | O | |||||||
WNMG080408-AM | 1.20-4.30 | 0.20-0.60 | • | O | • | O | O | ||||||||
WNMG080412-AM | 1.80-4.30 | 0.30-0.90 | • | O | • | O | O | ||||||||
WNMG080416-AM | 2.40-4.30 | 0.40-1.20 | • | O | • | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4215 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Machining garbh | WNMG060408-AR | 0.80-4.00 | 0.15-0.50 | • | O | ||||||||||
WNMG060412-AR | 0.80-4.00 | 0.15-0.50 | • | O | |||||||||||
WNMG080408-AR | 0.80-4.50 | 0.15-0.55 | • | O | |||||||||||
WNMG080412-AR | 0.80-4.50 | 0.20-0.55 | • | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Crìochnaich | WNMG060404-BF | 0.25-2.40 | 0.05-0.15 | • | • | O | O | ||||||||
WNMG060408-BF | 0.50-2.40 | 0.10-0.30 | • | • | O | O | |||||||||
WNMG080404-BF | 0.25-3.20 | 0.05-0.15 | • | • | O | O | |||||||||
WNMG080408-BF | 0.50-3.20 | 0.10-0.30 | • | • | O | O | |||||||||
WNMG080412-BF | 0.75-3.20 | 0.15-0.45 | • | • | O | O | |||||||||
WNMG080416-BF | 1.05-3.20 | 0.20-0.60 | • | • | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi-chrìochnachadh | WNMG060404-BM | 0.30-2.10 | 0.10-0.30 | O | O | • | O | O | |||||||
WNMG060408-BM | 0.65-2.10 | 0.15-0.45 | O | O | • | O | O | ||||||||
WNMG080404-BM | 0.30-2.90 | 0.10-0.30 | O | O | • | O | O | ||||||||
WNMG080408-BM | 0.65-2.90 | 0.15-0.45 | O | O | • | O | O | ||||||||
WNMG080412-BM | 0.95-2.90 | 0.20-0.60 | O | O | • | O | O | ||||||||
WNMG080416-BM | 1.25-2.90 | 0.25-0.75 | O | O | • | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Machining garbh | WNMG060404-BR | 0.30-2.10 | 0.10-0.30 | O | O | O | • | • | O | ||||||
WNMG060408-BR | 0.65-2.10 | 0.15-0.45 | O | O | O | • | • | O | |||||||
WNMG080404-BR | 0.30-2.90 | 0.10-0.30 | O | O | O | • | • | O | |||||||
WNMG080408-BR | 0.65-2.90 | 0.15-0.45 | O | O | O | • | • | O | |||||||
WNMG080412-BR | 0.95-2.90 | 0.20-0.60 | O | O | O | • | • | O | |||||||
WNMG080416-BR | 1.25-2.90 | 0.25-0.75 | O | O | O | • | • | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||
CVD | |||||||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi-chrìochnachadh | WNMG080404-CM | 0.08-0.25 | 0.40-2.90 | • | • | ||
WNMG080408-CM | 0.15-0.45 | 0.80-2.90 | • | • | |||
WNMG080412-CM | 0.25-0.66 | 1.20-2.90 | • | • |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | ||||||||||||
CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1330 | ||||
S Semi-chrìochnachadh | WNMG080404-DM | 0.40-4.30 | 0.08-0.25 | O | O | O | • | • | O | O | ||||||
WNMG080408-DM | 0.80-4.30 | 0.15-0.45 | O | O | O | • | • | O | O | |||||||
WNMG080412-DM | 1.20-4.30 | 0.25-0.66 | O | O | O | • | • | O | O | |||||||
WNMG080416-DM | 1.60-4.30 | 0.30-0.90 | O | O | O | • | • | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas:
Faodaidh na WNMG Turning Inserts dèiligeadh ri ioma-obair le bhith a’ cothlamadh diofar luchd-brisidh chip agus ìrean. Air a mholadh airson garbh, leth-chrìochnachadh agus crìochnachadh innealachadh a’ mhòr-chuid de steels, steels gun staoin, iarann teilgte agus super alloys fo chumhachan seasmhach.
Tha loidhne toraidh uidheamachd pròiseas cinneasachaidh lann iomlan aig a’ chompanaidh bho ullachadh stuthan amh pùdar, dèanamh molltair, brùthadh, sintering cuideam, bleith, còmhdach agus còmhdach iar-làimhseachaidh. Tha e a’ cuimseachadh air rannsachadh agus ùr-ghnàthachadh an stuth bunaiteach, structar groove, cruthachadh mionaideachd agus còmhdach uachdar cuir a-steach carbide NC, agus an-còmhnaidh a’ leasachadh èifeachdas innealachaidh, beatha seirbheis agus feartan gearraidh eile de chuir a-steach carbide NC. Às deidh còrr is deich bliadhna de rannsachadh saidheansail agus ùr-ghnàthachadh, tha a’ chompanaidh air grunn phrìomh theicneòlasan neo-eisimeileach a mhaighstireachd, tha comasan R&D agus dealbhaidh neo-eisimeileach aca, agus is urrainn dhaibh cinneasachadh gnàthaichte a thoirt seachad airson gach teachdaiche.