- English
- Español
- Português
- Deutsch
- Français
- Italiano
- हिन्दी
- Русский
- 한국어
- 日本語
- العربية
- ภาษาไทย
- Türkçe
- Nederlands
- Tiếng Việt
- Bahasa Indonesia
- עברית
- Afrikaans
- አማርኛ
- Azerbaijani
- беларуская мова
- Български
- বাংলা
- bosanski jezik
- Català
- Binisaya
- Corsu
- Čeština
- Cymraeg
- Dansk
- Ελληνικά
- Esperanto
- Eesti Keel
- Euskara
- فارسی
- Suomi
- Frysk
- Gaeilge
- Gàidhlig
- Galego
- ગુજરાતી
- Harshen Hausa
- ʻŌlelo Hawaiʻi
- Hmoob
- Hrvatski
- Kreyòl Ayisyen
- Magyar
- Հայերեն
- Asụsụ Igbo
- Íslenska
- Basa Jawa
- ქართული
- Қазақ тілі
- ភាសាខ្មែរ
- ಕನ್ನಡ
- Kurdî
- кыргыз тили
- Lëtzebuergesch
- ພາສາລາວ
- Lietuvių
- Latviešu
- Malagasy fiteny
- Te Reo Māori
- македонски
- മലയാളം
- Монгол
- मराठी
- Bahasa Melayu
- Malti
- မြန်မာစာ
- नेपाली
- Norsk
- Chinyanja
- ଓଡ଼ିଆ oṛiā
- ਪੰਜਾਬੀ
- Polski
- پښتو
- Română
- Ikinyarwanda
- سنڌي
- සිංහල
- Slovenčina
- slovenščina
- Gagana Sāmoa
- ChiShona
- Af-Soomaali
- Shqip
- Српски
- Sesotho
- Basa Sunda
- Svenska
- Kiswahili
- தமிழ்
- తెలుగు
- Тоҷикӣ
- Türkmençe
- Filipino
- татарча
- ئۇيغۇر تىلى
- Українська
- اردو
- Oʻzbek tili
- isiXhosa
- ײִדיש
- èdè Yorùbá
- 中文(简体)
- 中文(漢字)
- isiZulu
Muileann crìochnachaidh Optimized F4 F2 H airson stàilinn cruaidh
Muileann crìochnachaidh airson stàilinn cruaidh (48-60 HRC)
Muileann crìochnachaidh HJMJ600 airson stàilinn cruaidh (48-60 HRC)
Iarrtas: Airson crìochnachadh steels cruaidh (48-60 HRC).
Còmhdach àrd-choileanadh AlCrSiN
F4 F2
Aithris litreachail:
Muileann crìochnachaidh airson bàsachadh air a chleachdadh gu farsaing, faodar a chuir a-steach agus a chleachdadh ann an innealan giuthais no dealain, èifeachdas cinneasachaidh agus seasmhachd na cuibhle bleith agus àrdaich an àireamh de thursan ann am faidhle.
Feartan:
1.High cruas, stuthan matrix àrd cruas, dealbhadh ceàrn sònraichte agus làimhseachadh iomall, sònraichte airson steels cruaidh a ’gairm.
2.For steels cruaidh (48-60 HRC) a 'crìochnachadh.
3.Recommended fuarachadh ceò adhair no ola a chleachdadh.
Meud cunbhalach:
1.4 Muilnean Deireadh Flute
| Ag òrdachadh còd | Taobh a-muigh trast-thomhas | Flute Fad | Fad iomlan | Trast-thomhas Shank |
| （d） | （L） | （D） | ||
| HJMJ600-4F-D010-L050 | 1.0 | 3.0 | 50 | 4 |
| HJMJ600-4F-D015-L050 | 1.5 | 4.5 | 50 | 4 |
| HJMJ600-4F-D020-L050 | 2.0 | 6.0 | 50 | 4 |
| HJMJ600-4F-D025-L050 | 2.5 | 7.0 | 50 | 4 |
| HJMJ600-4F-D030-L050 | 3.0 | 8.0 | 50 | 4 |
| HJMJ600-4F-D035-L050 | 3.5 | 10.0 | 50 | 4 |
| HJMJ600-4F-D040-L050 | 4.0 | 11.0 | 50 | 4 |
| HJMJ600-4F-D050-L050 | 5.0 | 13.0 | 50 | 6 |
| HJMJ600-4F-D060-L050 | 6.0 | 16.0 | 50 | 6 |
| HJMJ600-4F-D070-L060 | 7.0 | 17.0 | 60 | 8 |
| HJMJ600-4F-D080-L060 | 8.0 | 20.0 | 60 | 8 |
| HJMJ600-4F-D090-L075 | 9.0 | 25.0 | 75 | 10 |
| HJMJ600-4F-D100-L075 | 10.0 | 25.0 | 75 | 10 |
| HJMJ600-4F-D110-L075 | 11.0 | 28.0 | 75 | 12 |
| HJMJ600-4F-D120-L075 | 12.0 | 30.0 | 75 | 12 |
| HJMJ600-4F-D140-L080 | 14.0 | 35.0 | 80 | 14 |
| HJMJ600-4F-D160-L100 | 16.0 | 45.0 | 100 | 16 |
| HJMJ600-4F-D180-L100 | 18.0 | 48.0 | 100 | 18 |
| HJMJ600-4F-D200-L100 | 20.0 | 50.0 | 100 | 20 |
2. 2 Flute Corner Radius End mills
 Ag òrdachadh còd | Taobh a-muigh trast-thomhas | R | Flute Fad | Fad iomlan | Trast-thomhas Shank |
| （d） | （l） | （L） | （D） | ||
| HJMJ600-2F-010-02 | 1 | 0.2 | 2 | 50 | 4 |
| HJMJ600-2F-015-02 | 1.5 | 0.2 | 3 | 50 | 4 |
| HJMJ600-2F-015-03 | 1.5 | 0.2 | 3 | 50 | 4 |
| HJMJ600-2F-020-02 | 2 | 0.2 | 4 | 50 | 4 |
| HJMJ600-2F-020-05 | 2 | 0.5 | 4 | 50 | 4 |
| HJMJ600-2F-025-02 | 2.5 | 0.2 | 5 | 50 | 4 |
| HJMJ600-2F-025-05 | 2.5 | 0.5 | 5 | 50 | 4 |
| HJMJ600-2F-030-02 | 3 | 0.2 | 6 | 50 | 4 |
| HJMJ600-2F-030-05 | 3 | 0.5 | 6 | 50 | 4 |
| HJMJ600-2F-030-10 | 3 | 1 | 6 | 50 | 4 |
| HJMJ600-2F-040-02 | 4 | 0.2 | 8 | 50 | 4 |
| HJMJ600-2F-040-05 | 4 | 0.5 | 8 | 50 | 4 |
| HJMJ600-2F-040-10 | 4 | 1 | 8 | 50 | 4 |
| HJMJ600-2F-050-05 | 5 | 0.5 | 10 | 50 | 6 |
| HJMJ600-2F-050-10 | 5 | 1 | 10 | 50 | 6 |
| HJMJ600-2F-060-02 | 6 | 0.2 | 12 | 50 | 6 |
| HJMJ600-2F-060-05 | 6 | 0.5 | 12 | 50 | 6 |
| HJMJ600-2F-060-10 | 6 | 1 | 12 | 50 | 6 |
| HJMJ600-2F-060-15 | 6 | 1.5 | 12 | 50 | 6 |
| HJMJ600-2F-060-20 | 6 | 2 | 12 | 50 | 8 |
| HJMJ600-2F-080-05 | 8 | 0.5 | 16 | 60 | 8 |
| HJMJ600-2F-080-10 | 8 | 1 | 16 | 60 | 8 |
| HJMJ600-2F-080-15 | 8 | 1.5 | 16 | 60 | 8 |
| HJMJ600-2F-080-20 | 8 | 2 | 16 | 60 | 8 |
| HJMJ600-2F-100-05 | 10 | 0.5 | 20 | 75 | 10 |
| HJMJ600-2F-100-10 | 10 | 1 | 20 | 75 | 10 |
| HJMJ600-2F-100-15 | 10 | 1.5 | 20 | 75 | 10 |
| HJMJ600-2F-100-20 | 10 | 2 | 20 | 75 | 10 |
| HJMJ600-2F-100-25 | 10 | 2.5 | 20 | 75 | 10 |
| HJMJ600-2F-100-30 | 10 | 3 | 20 | 75 | 10 |
| HJMJ600-2F-120-05 | 12 | 0.5 | 24 | 75 | 12 |
| HJMJ600-2F-120-10 | 12 | 1 | 24 | 75 | 12 |
| HJMJ600-2F-120-15 | 12 | 1.5 | 24 | 75 | 12 |
| HJMJ600-2F-120-20 | 12 | 20 | 24 | 75 | 12 |
| HJMJ600-2F-120-25 | 12 | 2.5 | 24 | 75 | 12 |
| HJMJ600-2F-120-30 | 12 | 3 | 24 | 75 | 12 |
3.4 Muilnean crìochnachaidh Radius Corner Flute
| Ag òrdachadh còd | Taobh a-muigh trast-thomhas | R | Flute Fad | Fad iomlan | Trast-thomhas Shank |
| （d） | （l） | （L） | （D） | ||
| HJMJ600-4F-030-02 | 3 | 0.2 | 6 | 50 | 4 |
| HJMJ600-4F-030-05 | 3 | 0.5 | 6 | 50 | 4 |
| HJMJ600-4F-030-10 | 3 | 1 | 6 | 50 | 4 |
| HJMJ600-4F-040-02 | 4 | 0.2 | 8 | 50 | 4 |
| HJMJ600-4F-040-05 | 4 | 0.5 | 8 | 50 | 4 |
| HJMJ600-4F-040-10 | 4 | 1 | 8 | 50 | 4 |
| HJMJ600-4F-050-05 | 5 | 0.5 | 10 | 50 | 6 |
| HJMJ600-4F-050-10 | 5 | 1 | 10 | 50 | 6 |
| HJMJ600-4F-060-02 | 6 | 0.2 | 12 | 50 | 6 |
| HJMJ600-4F-060-05 | 6 | 0.5 | 12 | 50 | 6 |
| HJMJ600-4F-060-10 | 6 | 1 | 12 | 50 | 6 |
| HJMJ600-4F-060-15 | 6 | 1.5 | 12 | 50 | 6 |
| HJMJ600-4F-060-20 | 6 | 2 | 12 | 50 | 8 |
| HJMJ600-4F-080-05 | 8 | 0.5 | 16 | 60 | 8 |
| HJMJ600-4F-080-10 | 8 | 1 | 16 | 60 | 8 |
| HJMJ600-4F-080-15 | 8 | 1.5 | 16 | 60 | 8 |
| HJMJ600-4F-080-20 | 8 | 2 | 16 | 60 | 8 |
| HJMJ600-4F-100-05 | 10 | 0.5 | 20 | 75 | 10 |
| HJMJ600-4F-100-10 | 10 | 1 | 20 | 75 | 10 |
| HJMJ600-4F-100-15 | 10 | 1.5 | 20 | 75 | 10 |
| HJMJ600-4F-100-20 | 10 | 2 | 20 | 75 | 10 |
| HJMJ600-4F-100-25 | 10 | 2.5 | 20 | 75 | 10 |
| HJMJ600-4F-100-30 | 10 | 3 | 20 | 75 | 10 |
| HJMJ600-4F-120-05 | 12 | 0.5 | 24 | 75 | 12 |
| HJMJ600-4F-120-10 | 12 | 1 | 24 | 75 | 12 |
| HJMJ600-4F-120-15 | 12 | 1.5 | 24 | 75 | 12 |
| HJMJ600-4F-120-20 | 12 | 2 | 24 | 75 | 12 |
| HJMJ600-4F-120-25 | 12 | 2.5 | 24 | 75 | 12 |
| HJMJ600-4F-120-30 | 12 | 3 | 24 | 75 | 12 |
Co-dhèanamh stuthan innealan
Còmhdach àrd-choileanadh AlCrSiN
Feartan agus gnìomh
1 、 Meudachadh cinneasachd mar thoradh air astar gearraidh gu math nas àirde agus biadhadh airson tagraidhean ann an raon farsaing de stuthan.
2 、 Tha dealbhadh sònraichte de structar a’ toirt deagh chothromachadh eadar cruas, seasmhachd teirmeach-shock agus cuideam air fhàgail.
Paramadair obrachaidh:
| HJMJ600End mill for die Operation parameter: | |||||||||||
| HJMJ600-S4 For Alloy Steel,Hardened Steel-Side Milling | |||||||||||
| Ìrean | Cruth inneal | Stuth-obrach | A’ gearradh doimhneachd | VC | Inneal Trast-thomhas | 2 | 4 | 6 | 8 | 10 | 12 |
| S4 | (mm) | m/mion | (mm) | ||||||||
| HJMJ600 | Ceàrnag, radius oisean | HRC58 | ap≤1D | 120 | Speed（min-1) | 19100 | 9550 | 6730 | 4780 | 3820 | 3190 |
| ae≤0.05D | Astar biadhaidh | 760 | 760 | 760 | 760 | 730 | 710 | ||||
| （mm/mion) | |||||||||||
| HRC58-62 | ap≤0.7D | 90 | Luas | 15920 | 11940 | 7960 | 5970 | 4780 | 3980 | ||
| （min-1) | |||||||||||
| ae≤0.03D | Astar biadhaidh | 510 | 720 | 730 | 720 | 730 | 670 | ||||
| （mm/mion) | |||||||||||
An aire:
Dèan cinnteach gu bheil am pìos obrach agus an inneal seasmhach agus cleachd inneal-gleidhidh mionaideach.
Feuch an atharraich thu an astar, an biathadh agus an doimhneachd gearraidh a rèir na fìor shuidheachaidhean gearraidh.
Tha na cumhaichean muilleidh airson muileann crìochnachaidh far a bheil fad an inneal crochte nas lugha na 4 * D (dia muileann). Nuair a tha fad an inneal crochte nas fhaide, feuch an atharraich thu astar, biadhadh agus doimhneachd gearraidh.
Tha loidhne toraidh uidheamachd pròiseas cinneasachaidh lann iomlan aig a’ chompanaidh bho ullachadh stuthan amh pùdar, dèanamh molltair, brùthadh, sintering cuideam, bleith, còmhdach agus còmhdach iar-làimhseachaidh. Tha e a’ cuimseachadh air rannsachadh agus ùr-ghnàthachadh an stuth bunaiteach, structar groove, cruthachadh mionaideachd agus còmhdach uachdar cuir a-steach carbide NC, agus an-còmhnaidh a’ leasachadh èifeachdas innealachaidh, beatha seirbheis agus feartan gearraidh eile de chuir a-steach carbide NC. Às deidh còrr is deich bliadhna de rannsachadh saidheansail agus ùr-ghnàthachadh, tha a’ chompanaidh air grunn phrìomh theicneòlasan neo-eisimeileach a mhaighstireachd, tha comasan R&D agus dealbhaidh neo-eisimeileach aca, agus is urrainn dhaibh cinneasachadh gnàthaichte a thoirt seachad airson gach teachdaiche.
