Ainm toraidh: CNMG Inserts
Sreath: CNMG
Luchd-brisidh chip: AM/AR/BF/BM/BR/CM/DM
Fiosrachadh toraidh:
CNMG le dà thaobh 80 ° tionndadh Rhombic Faodaidh Inserts.it dèiligeadh ri ioma-obair le bhith a’ cothlamadh diofar luchd-brisidh chip agus ìrean. a bheir innealachadh èifeachdach agus àrd seasmhachd.Universal àrd ìre cinneasachd airson tionndadh.Good cothromachadh cinneasachd agus earbsachd.it tha e na dheagh roghainn airson roughing.finishing agus coitcheann machining.
Sònrachaidhean:
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4225 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi-chrìochnachadh | CNMG120404-AM | 0.60-6.40 | 0.10-0.30 | • | O | • | O | O | |||||||
CNMG120408-AM | 1.20-6.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
CNMG120412-AM | 1.80-6.40 | 0.30-0.90 | • | O | • | O | O | ||||||||
CNMG120416-AM | 2.40-6.40 | 0.12-0.40 | • | O | • | O | O | ||||||||
CNMG160608-AM | 1.20-8.10 | 0.10-0.30 | • | O | • | O | O | ||||||||
CNMG160612-AM | 1.80-8.10 | 0.20-0.60 | • | O | • | O | O | ||||||||
CNMG160616-AM | 2.40-8.10 | 0.30-0.90 | • | O | • | O | O | ||||||||
CNMG190608-AM | 1.20-9.70 | 0.20-0.60 | • | O | • | O | O | ||||||||
CNMG190612-AM | 1.80-9.70 | 0.30-0.90 | • | O | • | O | O | ||||||||
CNMG190616-AM | 2.40-9.70 | 0.40-1.20 | • | O | • | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Machining garbh | CNMG120408-AR | 1.45-5.20 | 0.15-0.32 | • | O | ||||||||||
CNMG120412-AR | 2.15-5.20 | 0.25-0.50 | • | O | |||||||||||
CNMG120416-AR | 2.90-5.20 | 0.30-0.65 | • | O | |||||||||||
CNMG160608-AR | 1.45-6.40 | 0.15-6.35 | • | O | |||||||||||
CNMG160612-AR | 2.15-6.40 | 0.24-0.50 | • | O | |||||||||||
CNMG160616-AR | 2.90-6.40 | 0.30-0.65 | • | O | |||||||||||
CNMG190608-AR | 1.45-7.70 | 0.15-0.35 | • | O | |||||||||||
CNMG190612-AR | 2.15-7.70 | 0.25-0.50 | • | O | |||||||||||
CNMG190616-AR | 2.90-7.70 | 0.30-0.65 | • | O | |||||||||||
CNMG190624-AR | 4.30-7.70 | 0.45-0.95 | • | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Crìochnaich | CNMG090304-BF | 0.25-2.40 | 0.05-0.15 | • | • | O | O | O | |||||||
CNMG090308-BF | 0.50-2.40 | 0.10-0.30 | • | • | O | O | O | ||||||||
CNMG120404-BF | 0.25-3.20 | 0.05-0.15 | • | • | O | O | O | ||||||||
CNMG120408-BF | 0.50-3.20 | 0.10-0.30 | • | • | O | O | O | ||||||||
CNMG120412-BF | 0.75-3.20 | 0.15-0.45 | • | • | O | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi-chrìochnachadh | CNMG120404-BM | 0.30-4.30 | 0.08-0.25 | O | O | • | O | O | |||||||
CNMG120408-BM | 0.65-4.30 | 0.15-0.45 | O | O | • | O | O | ||||||||
CNMG120412-BM | 0.95-4.30 | 0.20-0.65 | O | O | • | O | O | ||||||||
CNMG160608-BM | 0.65-5.30 | 0.15-0.45 | O | O | • | O | O | ||||||||
CNMG160612-BM | 0.95-5.30 | 0.25-0.65 | O | O | • | O | O | ||||||||
CNMG160616-BM | 1.30-5.30 | 0.30-0.90 | O | O | • | O | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||
CVD | |||||||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi-chrìochnachadh | CNMG120404-CM | 0.40-4.30 | 0.08-0.25 | • | |||
CNMG120408-CM | 0.80-4.30 | 0.15-0.45 | • | ||||
CNMG120412-CM | 1.20-4.30 | 0.20-0.65 | • | ||||
CNMG160612-CM | 1.20-5.30 | 0.25-0.65 | • | ||||
CNMG160616-CM | 1.60-5.30 | 0.30-0.90 | • | ||||
CNMG190612-CM | 1.20-6.40 | 0.25-0.65 | • |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Machining garbh | CNMG120404-BR | 0.30-4.30 | 0.08-0.25 | O | O | O | • | • | O | ||||||
CNMG120408-BR | 0.65-4.30 | 0.15-0.45 | O | O | O | • | • | O | |||||||
CNMG120412-BR | 0.95-4.30 | 0.25-0.65 | O | O | O | • | • | O | |||||||
CNMG160608-BR | 0.65-5.30 | 0.15-0.45 | O | O | O | • | • | O | |||||||
CNMG160612-BR | 0.95-5.30 | 0.25-0.65 | O | O | O | • | • | O | |||||||
CNMG160616-BR | 1.25-5.30 | 0.30-0.90 | O | O | O | • | • | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | ||||||||||||
CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Semi-chrìochnachadh | CNMG120404-DM | 0.40-4.30 | 0.08-0.25 | O | O | O | • | O | • | O | ||||||
CNMG120408-DM | 0.80-4.30 | 0.15-0.45 | O | O | O | • | O | • | O | |||||||
CNMG120412-DM | 1.20-4.30 | 0.25-0.65 | O | O | O | • | O | • | O | |||||||
CNMG120416-DM | 1.60-4.30 | 0.30-0.90 | O | O | O | • | O | • | O |
• : Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas:
Tha ìrean sònraichte agus geoimeatraidh airson a h-uile tagradh agus stuth.CNMG 80 ° Turning Inserts na dheagh roghainn airson innealachadh garbh, leth-chrìochnachaidh agus crìochnachaidh a’ mhòr-chuid de steels, steels gun staoin, iarann teilgte, stuthan neo-iarannach, agus sàr alloys fo chumhachan seasmhach. Bidh e cuideachd a’ coileanadh gu math innealachadh stuthan cruadhaichte agus chipping goirid.
Tha loidhne toraidh uidheamachd pròiseas cinneasachaidh lann iomlan aig a’ chompanaidh bho ullachadh stuthan amh pùdar, dèanamh molltair, brùthadh, sintering cuideam, bleith, còmhdach agus còmhdach iar-làimhseachaidh. Tha e a’ cuimseachadh air rannsachadh agus ùr-ghnàthachadh an stuth bunaiteach, structar groove, cruthachadh mionaideachd agus còmhdach uachdar cuir a-steach carbide NC, agus an-còmhnaidh a’ leasachadh èifeachdas innealachaidh, beatha seirbheis agus feartan gearraidh eile de chuir a-steach carbide NC. Às deidh còrr is deich bliadhna de rannsachadh saidheansail agus ùr-ghnàthachadh, tha a’ chompanaidh air grunn phrìomh theicneòlasan neo-eisimeileach a mhaighstireachd, tha comasan R&D agus dealbhaidh neo-eisimeileach aca, agus is urrainn dhaibh cinneasachadh gnàthaichte a thoirt seachad airson gach teachdaiche.