- English
- Español
- Português
- Deutsch
- Français
- Italiano
- हिन्दी
- Русский
- 한국어
- 日本語
- العربية
- ภาษาไทย
- Türkçe
- Nederlands
- Tiếng Việt
- Bahasa Indonesia
- עברית
- Afrikaans
- አማርኛ
- Azerbaijani
- беларуская мова
- Български
- বাংলা
- bosanski jezik
- Català
- Binisaya
- Corsu
- Čeština
- Cymraeg
- Dansk
- Ελληνικά
- Esperanto
- Eesti Keel
- Euskara
- فارسی
- Suomi
- Frysk
- Gaeilge
- Gàidhlig
- Galego
- ગુજરાતી
- Harshen Hausa
- ʻŌlelo Hawaiʻi
- Hmoob
- Hrvatski
- Kreyòl Ayisyen
- Magyar
- Հայերեն
- Asụsụ Igbo
- Íslenska
- Basa Jawa
- ქართული
- Қазақ тілі
- ភាសាខ្មែរ
- ಕನ್ನಡ
- Kurdî
- кыргыз тили
- Lëtzebuergesch
- ພາສາລາວ
- Lietuvių
- Latviešu
- Malagasy fiteny
- Te Reo Māori
- македонски
- മലയാളം
- Монгол
- मराठी
- Bahasa Melayu
- Malti
- မြန်မာစာ
- नेपाली
- Norsk
- Chinyanja
- ଓଡ଼ିଆ oṛiā
- ਪੰਜਾਬੀ
- Polski
- پښتو
- Română
- Ikinyarwanda
- سنڌي
- සිංහල
- Slovenčina
- slovenščina
- Gagana Sāmoa
- ChiShona
- Af-Soomaali
- Shqip
- Српски
- Sesotho
- Basa Sunda
- Svenska
- Kiswahili
- தமிழ்
- తెలుగు
- Тоҷикӣ
- Türkmençe
- Filipino
- татарча
- ئۇيغۇر تىلى
- Українська
- اردو
- Oʻzbek tili
- isiXhosa
- ײִדיש
- èdè Yorùbá
- 中文(简体)
- 中文(漢字)
- isiZulu
CNMG Turning Inserts
CNMG Turning Inserts
Produktnamme: CNMG Inserts
Searjes: CNMG
Chipbrekers: AM/AR/BF/BM/BR/CM/DM
Produkt Ynformaasje:
CNMG Double-Sided 80 ° Rhombic turning Inserts.it kin omgean mei meardere operaasjes troch it kombinearjen fan ferskate chip breakers en grades.CNMG 80 ° Turning Inserts feature in avansearre coating oer in hiel deformation-resistant unalloyed carbid substraat. dat sil bringe effisjinte Machtigingsformulier en hege stabiliteit. Universele hege produktiviteit grade foar turning. Good lykwicht fan produktiviteit en reliability.it is in goede ideale kar foar roughing.finishing en algemiene machining.
Spesifikaasjes:
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4225 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Semi Finishing | CNMG120404-AM | 0.60-6.40 | 0.10-0.30 | • | O | • | O | O | |||||||
CNMG120408-AM | 1.20-6.40 | 0.20-0.60 | • | O | • | O | O | ||||||||
CNMG120412-AM | 1.80-6.40 | 0.30-0.90 | • | O | • | O | O | ||||||||
CNMG120416-AM | 2.40-6.40 | 0.12-0.40 | • | O | • | O | O | ||||||||
CNMG160608-AM | 1.20-8.10 | 0.10-0.30 | • | O | • | O | O | ||||||||
CNMG160612-AM | 1.80-8.10 | 0.20-0.60 | • | O | • | O | O | ||||||||
CNMG160616-AM | 2.40-8.10 | 0.30-0.90 | • | O | • | O | O | ||||||||
CNMG190608-AM | 1.20-9.70 | 0.20-0.60 | • | O | • | O | O | ||||||||
CNMG190612-AM | 1.80-9.70 | 0.30-0.90 | • | O | • | O | O | ||||||||
CNMG190616-AM | 2.40-9.70 | 0.40-1.20 | • | O | • | O | O | ||||||||
• : Recommended Grade
O: Opsjonele Grade
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK4235 | JK4335 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | ||||
P Rough Machining | CNMG120408-AR | 1.45-5.20 | 0.15-0.32 | • | O | ||||||||||
CNMG120412-AR | 2.15-5.20 | 0.25-0.50 | • | O | |||||||||||
CNMG120416-AR | 2.90-5.20 | 0.30-0.65 | • | O | |||||||||||
CNMG160608-AR | 1.45-6.40 | 0.15-6.35 | • | O | |||||||||||
CNMG160612-AR | 2.15-6.40 | 0.24-0.50 | • | O | |||||||||||
CNMG160616-AR | 2.90-6.40 | 0.30-0.65 | • | O | |||||||||||
CNMG190608-AR | 1.45-7.70 | 0.15-0.35 | • | O | |||||||||||
CNMG190612-AR | 2.15-7.70 | 0.25-0.50 | • | O | |||||||||||
CNMG190616-AR | 2.90-7.70 | 0.30-0.65 | • | O | |||||||||||
CNMG190624-AR | 4.30-7.70 | 0.45-0.95 | • | O | |||||||||||
• : Recommended Grade
O: Opsjonele Grade
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Finishing | CNMG090304-BF | 0.25-2.40 | 0.05-0.15 | • | • | O | O | O | |||||||
CNMG090308-BF | 0.50-2.40 | 0.10-0.30 | • | • | O | O | O | ||||||||
CNMG120404-BF | 0.25-3.20 | 0.05-0.15 | • | • | O | O | O | ||||||||
CNMG120408-BF | 0.50-3.20 | 0.10-0.30 | • | • | O | O | O | ||||||||
CNMG120412-BF | 0.75-3.20 | 0.15-0.45 | • | • | O | O | O | ||||||||
• : Recommended Grade
O: Opsjonele Grade
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
| CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1525 | JR1330 | ||||
M Semi Finishing | CNMG120404-BM | 0.30-4.30 | 0.08-0.25 | O | O | • | O | O | |||||||
CNMG120408-BM | 0.65-4.30 | 0.15-0.45 | O | O | • | O | O | ||||||||
CNMG120412-BM | 0.95-4.30 | 0.20-0.65 | O | O | • | O | O | ||||||||
CNMG160608-BM | 0.65-5.30 | 0.15-0.45 | O | O | • | O | O | ||||||||
CNMG160612-BM | 0.95-5.30 | 0.25-0.65 | O | O | • | O | O | ||||||||
CNMG160616-BM | 1.30-5.30 | 0.30-0.90 | O | O | • | O | O | ||||||||
• : Recommended Grade
O: Opsjonele Grade
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||
| CVD | |||||||
JK3020 | JK3040 | JK3315 | JK3415 | ||||
K Semi Finishing | CNMG120404-CM | 0.40-4.30 | 0.08-0.25 | • | |||
CNMG120408-CM | 0.80-4.30 | 0.15-0.45 | • | ||||
CNMG120412-CM | 1.20-4.30 | 0.20-0.65 | • | ||||
CNMG160612-CM | 1.20-5.30 | 0.25-0.65 | • | ||||
CNMG160616-CM | 1.60-5.30 | 0.30-0.90 | • | ||||
CNMG190612-CM | 1.20-6.40 | 0.25-0.65 | • | ||||
• : Recommended Grade
O: Opsjonele Grade
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1325 | JR1528 | JR1330 | ||||
M Rough Machining | CNMG120404-BR | 0.30-4.30 | 0.08-0.25 | O | O | O | • | • | O | ||||||
CNMG120408-BR | 0.65-4.30 | 0.15-0.45 | O | O | O | • | • | O | |||||||
CNMG120412-BR | 0.95-4.30 | 0.25-0.65 | O | O | O | • | • | O | |||||||
CNMG160608-BR | 0.65-5.30 | 0.15-0.45 | O | O | O | • | • | O | |||||||
CNMG160612-BR | 0.95-5.30 | 0.25-0.65 | O | O | O | • | • | O | |||||||
CNMG160616-BR | 1.25-5.30 | 0.30-0.90 | O | O | O | • | • | O | |||||||
• : Recommended Grade
O: Opsjonele Grade
| Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | ||||||||||||
| CVD | PVD | |||||||||||||||
JK4215 | JK4315 | JK4225 | JK4325 | JK1025 | JK1325 | JK1525 | JK1328 | JR1010 | JR1520 | JR1525 | JR1028 | JR1030 | ||||
S Semi Finishing | CNMG120404-DM | 0.40-4.30 | 0.08-0.25 | O | O | O | • | O | • | O | ||||||
CNMG120408-DM | 0.80-4.30 | 0.15-0.45 | O | O | O | • | O | • | O | |||||||
CNMG120412-DM | 1.20-4.30 | 0.25-0.65 | O | O | O | • | O | • | O | |||||||
CNMG120416-DM | 1.60-4.30 | 0.30-0.90 | O | O | O | • | O | • | O | |||||||
• : Recommended Grade
O: Opsjonele Grade
Oanfraach:
Dedicated grades en geometry foar alle applikaasjes en materials.CNMG 80 ° Turning Inserts is in ideale kar foar rûge, semi-finishing en finishing machining measte stielen, RVS, getten izeren, non-ferro materialen, en super alloys ûnder stabile omstannichheden. It docht ek goed ferwurke ferhurde en koarte chipping materialen.
It bedriuw hat in folsleine produksjeline foar blêdproduksjeprosesapparatuer fan tarieding fan poedergrûnstoffen, skimmel meitsjen, drukken, druk sinterjen, slypjen, coating en neibehanneling fan coating. It rjochtet him op it ûndersyk en ynnovaasje fan de basis materiaal, groove struktuer, precision foarmjen en oerflak coating fan carbid NC Inserts, en hieltyd ferbetteret de Machtigingsformulier effisjinsje, libbensdoer en oare cutting eigenskippen fan carbid NC Inserts. Nei mear as tsien jier fan wittenskiplik ûndersyk en ynnovaasje, it bedriuw hat behearske in oantal ûnôfhinklike kearn technologyen, hat ûnôfhinklike R & D en design mooglikheden, en kin foarsjen maatwurk produksje foar elke klant.
